AirTAC SC80X25SN Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Short-stroke SC cylinder with magnetic piston and N option.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC80X25SN is short-stroke SC cylinder with magnetic piston and N option.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, Pneumatic — no voltage, 80 mm bore × 25 mm stroke; S magnet; N seal option, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SC100X30SN Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Short-stroke SC cylinder with magnetic piston and N option.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC100X30SN is short-stroke SC cylinder with magnetic piston and N option.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, Pneumatic — no voltage, 100 mm bore × 30 mm stroke; S magnet; N seal option, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC 6V21008B200T 5/2-Way Solenoid Valve

Model-specific summary: Pilot-operated 5/2 valve with NPT 1/4 ports and DC 24 V coil.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

6V21008B200T is pilot-operated 5/2 valve with NPT 1/4 ports and DC 24 V coil.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify NPT 1/4, DC 24 V, Single-solenoid; 200 lead/connector option, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SAI32BX100SG ISO Pneumatic Cylinder

Model-specific summary: ISO-profile cylinder retaining B, magnetic-piston and G-thread options.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SAI32BX100SG is iSO-profile cylinder retaining B, magnetic-piston and G-thread options.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G-thread series port, Pneumatic — no voltage, 32 mm bore × 100 mm stroke; B/S/G options, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MF20X40SU Mini Pneumatic Cylinder

Model-specific summary: Mini cylinder with magnetic piston and U rear-cover configuration.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

MF20X40SU is mini cylinder with magnetic piston and U rear-cover configuration.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 40 mm stroke; S magnet; U rear cover, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MF20X100SU Mini Pneumatic Cylinder

Model-specific summary: Mini cylinder with magnetic piston and U rear-cover configuration.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

MF20X100SU is mini cylinder with magnetic piston and U rear-cover configuration.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 100 mm stroke; S magnet; U rear cover, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SE32X610SG Standard Pneumatic Cylinder

Model-specific summary: Long-stroke standard cylinder with magnetic piston and G-thread option.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SE32X610SG is long-stroke standard cylinder with magnetic piston and G-thread option.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G-thread series port, Pneumatic — no voltage, 32 mm bore × 610 mm stroke; magnet; G thread, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SE50X80S Standard Pneumatic Cylinder

Model-specific summary: Standard double-acting cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SE50X80S is standard double-acting cylinder with magnetic piston.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, Pneumatic — no voltage, 50 mm bore × 80 mm stroke; magnetic piston, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SE50X200S Standard Pneumatic Cylinder

Model-specific summary: Standard double-acting cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SE50X200S is standard double-acting cylinder with magnetic piston.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, Pneumatic — no voltage, 50 mm bore × 200 mm stroke; magnetic piston, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC DMSH-M08 Magnetic Cylinder Sensor

Model-specific summary: Cylinder position sensor with DMSH sensing family and M08 connector.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

DMSH-M08 is cylinder position sensor with DMSH sensing family and M08 connector.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify M08 connector option, Electrical sensor — confirm PLC voltage, DMSH sensor; M08 connector, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC TCM16X30S Guided Twin-Rod Pneumatic Cylinder

Model-specific summary: Compact guided twin-rod cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

TCM16X30S is compact guided twin-rod cylinder with magnetic piston.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series air port — verify drawing, Pneumatic — no voltage, 16 mm bore × 30 mm stroke; magnetic piston, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC CMSG-M08 Magnetic Cylinder Sensor

Model-specific summary: Cylinder position sensor with M08 connector option.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

CMSG-M08 is cylinder position sensor with M08 connector option.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify M08 connector option, Electrical sensor — confirm PLC voltage, CMSG sensor; M08 connector, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC TCM20X60S Guided Twin-Rod Pneumatic Cylinder

Model-specific summary: Double-acting guided twin-rod cylinder for stable compact positioning.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

TCM20X60S is double-acting guided twin-rod cylinder for stable compact positioning.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 60 mm stroke; magnetic piston, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC TCL12X70S Guided Twin-Rod Pneumatic Cylinder

Model-specific summary: Double-acting guided twin-rod cylinder for compact anti-rotation linear motion.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

TCL12X70S is double-acting guided twin-rod cylinder for compact anti-rotation linear motion.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series air port — verify drawing, Pneumatic — no voltage, 12 mm bore × 70 mm stroke; magnetic piston, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC AFR1500L1 A Series Air Filter Regulator

Model-specific summary: An AFR1500 low-pressure filter-regulator with PT 1/8 ports and MPa gauge scale.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

AFR1500L1 is an AFR1500 low-pressure filter-regulator with PT 1/8 ports and MPa gauge scale.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/8, Pneumatic — no voltage, Low-pressure; MPa scale, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC AFR2000N A Series Air Filter Regulator

Model-specific summary: An AFR2000 filter-regulator with PT 1/4 ports and no pressure gauge.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

AFR2000N is an AFR2000 filter-regulator with PT 1/4 ports and no pressure gauge.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/4, Pneumatic — no voltage, No pressure gauge, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC BFR2000MLNT B Series Air Filter Regulator

Model-specific summary: A BFR2000 filter-regulator with 1/4-inch NPT ports, metal bowl, low-pressure range and no gauge.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

BFR2000MLNT is a BFR2000 filter-regulator with 1/4-inch NPT ports, metal bowl, low-pressure range and no gauge.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, NPT 1/4, Pneumatic — no voltage, Metal bowl; low-pressure; no gauge, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC BFR3000MNWG B Series Air Filter Regulator

Model-specific summary: A BFR3000 filter-regulator with G 3/8 ports, metal bowl, no gauge and 5 μm filter element.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

BFR3000MNWG is a BFR3000 filter-regulator with G 3/8 ports, metal bowl, no gauge and 5 μm filter element.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, G 3/8, Pneumatic — no voltage, Metal bowl; no gauge; 5 μm, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC BFR3000ML4 B Series Air Filter Regulator

Model-specific summary: A BFR3000 filter-regulator with PT 3/8 port, metal bowl, low-pressure range and dual-unit scale.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

BFR3000ML4 is a BFR3000 filter-regulator with PT 3/8 port, metal bowl, low-pressure range and dual-unit scale.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 3/8, Pneumatic — no voltage, Metal bowl; low-pressure; scale 4, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAFR40015S GA Series Air Filter Regulator

Model-specific summary: A GA-series 400 filter-regulator with PT 1/2 connection and S option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAFR40015S is a GA-series 400 filter-regulator with PT 1/2 connection and S option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/2, Pneumatic — no voltage, 400 size; S option, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GF30010 G Series Air Filter

Model-specific summary: A G-series 300 air filter with PT 3/8 ports.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GF30010 is a G-series 300 air filter with PT 3/8 ports.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 3/8, Pneumatic — no voltage, 300 size filter, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GF40015 G Series Air Filter

Model-specific summary: A G-series 400 air filter with PT 1/2 ports.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GF40015 is a G-series 400 air filter with PT 1/2 ports.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/2, Pneumatic — no voltage, 400 size filter, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAR20008SJT GA Series Air Regulator

Model-specific summary: A GA-series 200 pressure regulator with 1/4-inch NPT ports and S/J options.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAR20008SJT is a GA-series 200 pressure regulator with 1/4-inch NPT ports and S/J options.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, NPT 1/4, Pneumatic — no voltage, 200 size; S/J options, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAR40015S GA Series Air Regulator

Model-specific summary: A GA-series 400 pressure regulator with PT 1/2 ports and S option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAR40015S is a GA-series 400 pressure regulator with PT 1/2 ports and S option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/2, Pneumatic — no voltage, 400 size; S option, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAFR30008S GA Series Air Filter Regulator

Model-specific summary: A GA-series 300 filter-regulator with PT 1/4 port and S option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAFR30008S is a GA-series 300 filter-regulator with PT 1/4 port and S option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/4, Pneumatic — no voltage, 300 size; S option, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GFR40015LF1 G Series Air Filter Regulator

Model-specific summary: A GFR400 low-pressure filter-regulator with PT 1/2 connection and F1 option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GFR40015LF1 is a GFR400 low-pressure filter-regulator with PT 1/2 connection and F1 option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/2, Pneumatic — no voltage, 400 size; low-pressure; F1, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GFR30010LJF1WTK G Series Air Filter Regulator

Model-specific summary: A low-pressure GFR300 filter-regulator with 3/8-inch NPT connection and J/F1/W/K options.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GFR30010LJF1WTK is a low-pressure GFR300 filter-regulator with 3/8-inch NPT connection and J/F1/W/K options.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, NPT 3/8, Pneumatic — no voltage, Low-pressure; J/F1/W/K options, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAFR30015S GA Series Air Filter Regulator

Model-specific summary: A GA-series 300 filter-regulator with PT 1/2 connection and S option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAFR30015S is a GA-series 300 filter-regulator with PT 1/2 connection and S option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 1/2, Pneumatic — no voltage, 300 size; S option, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GFR30010AF1T G Series Air Filter Regulator

Model-specific summary: A G-series 300 filter-regulator with 3/8-inch NPT port, automatic drain and F1 option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GFR30010AF1T is a G-series 300 filter-regulator with 3/8-inch NPT port, automatic drain and F1 option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, NPT 3/8, Pneumatic — no voltage, 300 size; automatic drain; F1, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC GAFR300C10S GA Series Air Filter Regulator

Model-specific summary: A GA-series 300C filter-regulator with PT 3/8 connection and S option.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

GAFR300C10S is a GA-series 300C filter-regulator with PT 3/8 connection and S option.

Typical applications

Compressed-air filtration and pressure regulation in industrial machinery.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, PT 3/8, Pneumatic — no voltage, 300C size; S option, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.