AirTAC MSBL40X100CA Mini Pneumatic Cylinder

Model-specific summary: MSBL configured mini cylinder; confirm exact series code.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. MSBL configured mini cylinder; confirm exact series code.

Quick selection answer

MSBL40X100CA is an AirTAC mini pneumatic cylinder configured as 40 mm bore × 100 mm stroke; ca rear cover.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 40 mm bore × 100 mm stroke; CA rear cover, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. MSBL configured mini cylinder; confirm exact series code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC MAC32X75SCA Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: MAC configured cylinder with CA swing-tail rear cover.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. MAC configured cylinder with CA swing-tail rear cover.

Quick selection answer

MAC32X75SCA is an AirTAC stainless steel mini pneumatic cylinder configured as 32 mm bore × 75 mm stroke; magnet; ca rear cover.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 32 mm bore × 75 mm stroke; magnet; CA rear cover, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. MAC configured cylinder with CA swing-tail rear cover.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC MAC32X200SCA Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: MAC configured cylinder with CA swing-tail rear cover.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. MAC configured cylinder with CA swing-tail rear cover.

Quick selection answer

MAC32X200SCA is an AirTAC stainless steel mini pneumatic cylinder configured as 32 mm bore × 200 mm stroke; magnet; ca rear cover.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 32 mm bore × 200 mm stroke; magnet; CA rear cover, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. MAC configured cylinder with CA swing-tail rear cover.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC MAC40X100SCA Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: MAC configured cylinder with CA swing-tail rear cover.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. MAC configured cylinder with CA swing-tail rear cover.

Quick selection answer

MAC40X100SCA is an AirTAC stainless steel mini pneumatic cylinder configured as 40 mm bore × 100 mm stroke; magnet; ca rear cover.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 40 mm bore × 100 mm stroke; magnet; CA rear cover, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. MAC configured cylinder with CA swing-tail rear cover.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC MAC16X200SU Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: MAC configured cylinder; verify complete catalog suffix.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. MAC configured cylinder; verify complete catalog suffix.

Quick selection answer

MAC16X200SU is an AirTAC stainless steel mini pneumatic cylinder configured as 16 mm bore × 200 mm stroke; magnet; u rear cover.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 16 mm bore × 200 mm stroke; magnet; U rear cover, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. MAC configured cylinder; verify complete catalog suffix.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SGJ160X100-20 Adjustable-Stroke Standard Cylinder

Model-specific summary: SGJ variant; verify adjustment direction and full code.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. SGJ variant; verify adjustment direction and full code.

Quick selection answer

SGJ160X100-20 is an AirTAC adjustable-stroke standard cylinder configured as 160 mm bore; 100 mm stroke; 20 mm adjustment.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 160 mm bore; 100 mm stroke; 20 mm adjustment, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. SGJ variant; verify adjustment direction and full code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SGCJ160X75-75 Adjustable-Stroke Standard Cylinder

Model-specific summary: SGCJ variant; verify adjustment direction and full code.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. SGCJ variant; verify adjustment direction and full code.

Quick selection answer

SGCJ160X75-75 is an AirTAC adjustable-stroke standard cylinder configured as 160 mm bore; 75 mm stroke; 75 mm adjustment.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify Series port — verify drawing, 160 mm bore; 75 mm stroke; 75 mm adjustment, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: VERIFY. SGCJ variant; verify adjustment direction and full code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC32X65 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 65 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 65 mm stroke; manufacturer confirmation required.

Quick selection answer

SC32X65 is an AirTAC standard tie-rod pneumatic cylinder configured as 32 mm bore × 65 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/8, 32 mm bore × 65 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 65 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC40X750 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 750 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 750 mm stroke; manufacturer confirmation required.

Quick selection answer

SC40X750 is an AirTAC standard tie-rod pneumatic cylinder configured as 40 mm bore × 750 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/4, 40 mm bore × 750 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 750 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC50X850 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 850 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 850 mm stroke; manufacturer confirmation required.

Quick selection answer

SC50X850 is an AirTAC standard tie-rod pneumatic cylinder configured as 50 mm bore × 850 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/4, 50 mm bore × 850 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 850 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC63X125 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC63X125 is an AirTAC standard tie-rod pneumatic cylinder configured as 63 mm bore × 125 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 63 mm bore × 125 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC63X200 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC63X200 is an AirTAC standard tie-rod pneumatic cylinder configured as 63 mm bore × 200 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 63 mm bore × 200 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC63X600 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC63X600 is an AirTAC standard tie-rod pneumatic cylinder configured as 63 mm bore × 600 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 63 mm bore × 600 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X50 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC80X50 is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 50 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 50 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X131 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 131 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 131 mm stroke; manufacturer confirmation required.

Quick selection answer

SC80X131 is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 131 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 131 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 131 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X150 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC80X150 is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 150 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 150 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC100X50 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC100X50 is an AirTAC standard tie-rod pneumatic cylinder configured as 100 mm bore × 50 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, 100 mm bore × 50 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC40X650S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 650 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 650 mm stroke; manufacturer confirmation required.

Quick selection answer

SC40X650S is an AirTAC standard tie-rod pneumatic cylinder configured as 40 mm bore × 650 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/4, 40 mm bore × 650 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 650 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X60S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 60 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 60 mm stroke; manufacturer confirmation required.

Quick selection answer

SC80X60S is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 60 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 60 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 60 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X270S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 270 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 270 mm stroke; manufacturer confirmation required.

Quick selection answer

SC80X270S is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 270 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 270 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 270 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X300S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Published standard-stroke configuration.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Published standard-stroke configuration.

Quick selection answer

SC80X300S is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 300 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 3/8, 80 mm bore × 300 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: STANDARD. Published standard-stroke configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC100X30S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 30 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 30 mm stroke; manufacturer confirmation required.

Quick selection answer

SC100X30S is an AirTAC standard tie-rod pneumatic cylinder configured as 100 mm bore × 30 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, 100 mm bore × 30 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 30 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC100X40S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 40 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 40 mm stroke; manufacturer confirmation required.

Quick selection answer

SC100X40S is an AirTAC standard tie-rod pneumatic cylinder configured as 100 mm bore × 40 mm stroke; magnetic piston.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, 100 mm bore × 40 mm stroke; magnetic piston, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 40 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC80X275G Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Non-standard 275 mm stroke; manufacturer confirmation required.

Key attributes

Product features

• Complete customer-supplied model retained for procurement and replacement reference.
• Selection-critical connection and configuration are shown before general specifications.
• Product family and configuration were checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the complete code with the product nameplate and manufacturer drawing.
2. Confirm pressure, speed, temperature, load, alignment and mounting clearance.
3. Use filtered compressed air and remove debris before connection.
4. Non-standard 275 mm stroke; manufacturer confirmation required.

Quick selection answer

SC80X275G is an AirTAC standard tie-rod pneumatic cylinder configured as 80 mm bore × 275 mm stroke; no magnet.

Typical applications

Suitable for industrial automation, clamping, positioning, handling, machine stopping or motion control where the stated series and configuration match the equipment.

Frequently asked questions

What should be checked before ordering?

Verify G 3/8, 80 mm bore × 275 mm stroke; no magnet, magnetic-piston requirement, mounting, accessories and the complete manufacturer code.

Is this a standard catalog configuration?

Status: OPEN_CUSTOM. Non-standard 275 mm stroke; manufacturer confirmation required.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Retrieval order: Stage 9 structured facts → Source Index → canonical page → exact PDF page. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC SC100X178G Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: SC cylinder with G-thread ports and a non-standard 178 mm stroke.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC100X178G is sC cylinder with G-thread ports and a non-standard 178 mm stroke.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G 1/2, Pneumatic — no voltage, 100 mm bore × 178 mm non-standard stroke; no magnet, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SC80X200SG Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: SC cylinder with magnetic piston and G-thread ports.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC80X200SG is sC cylinder with magnetic piston and G-thread ports.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G 3/8, Pneumatic — no voltage, 80 mm bore × 200 mm stroke; magnet; G thread, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC 5A41015 5/2-Way Air-Pilot Valve

Model-specific summary: Air-pilot directional valve for higher-flow pneumatic cylinder control.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

5A41015 is air-pilot directional valve for higher-flow pneumatic cylinder control.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, Pneumatic pilot — no voltage, 400 series; single-air-pilot configuration, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SC63X1000T Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Long-stroke SC cylinder with NPT ports and no magnetic-piston suffix.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC63X1000T is long-stroke SC cylinder with NPT ports and no magnetic-piston suffix.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify NPT 3/8, Pneumatic — no voltage, 63 mm bore × 1000 mm stroke; no magnet; NPT, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC 3V308NCBI 3/2-Way Solenoid Valve

Model-specific summary: Normally closed 3/2 valve with PT 1/4 port and DC 24 V lead-wire coil.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

3V308NCBI is normally closed 3/2 valve with PT 1/4 port and DC 24 V lead-wire coil.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/4, DC 24 V, Normally closed; I lead-wire option, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC SC100X300T Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: Standard SC cylinder with NPT ports and no magnetic-piston suffix.

Key attributes

Product features

• Complete ordering code retained for procurement and replacement cross-reference.
• Selection-critical connection, voltage and configuration are displayed prominently.
• Designed for industrial pneumatic automation within catalog ratings.

Installation and selection notes

1. Check the complete model code against the product nameplate.
2. Confirm pressure, temperature, medium, mounting and mating interface.
3. Use clean filtered air and remove debris before connection.
4. Non-standard strokes and abbreviated option codes require drawing confirmation before production use.

Quick selection answer

SC100X300T is standard SC cylinder with NPT ports and no magnetic-piston suffix.

Typical applications

Suitable for pneumatic control, positioning, machine automation, maintenance replacement and OEM equipment where the stated configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify NPT 1/2, Pneumatic — no voltage, 100 mm bore × 300 mm stroke; no magnet; NPT, dimensions, mounting and accessories.

Can a similar suffix be substituted?

No. A suffix may change thread, voltage, centre function, drain, filter, lead wire, magnetic piston or seal configuration.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.