AirTAC ASC20008G Pneumatic Flow Control Valve

Model-specific summary: Inline one-way flow controller for actuator speed adjustment in G-thread circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

ASC20008G is an AirTAC pneumatic flow control valve using G 1/4 and pneumatic — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 size; adjustable one-way flow control. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/4, Pneumatic — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2JWY25025Q63G Water-Hammer-Reduction Angle Seat Valve

Model-specific summary: Air-piloted angle-seat valve designed for controlled fluid switching and reduced hydraulic shock.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2JWY25025Q63G is an AirTAC water-hammer-reduction angle seat valve using G 1 inch and pneumatic actuator q63 — no electrical coil.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

SUS304 body; Y water-hammer-reduction option; 25 mm nominal. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1 inch, Pneumatic actuator Q63 — no electrical coil, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2JW20020Q40G Pneumatic Angle Seat Valve

Model-specific summary: Air-piloted stainless angle-seat valve with PTFE sealing and streamlined 45° flow path.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2JW20020Q40G is an AirTAC pneumatic angle seat valve using G 3/4 and pneumatic actuator q40 — no electrical coil.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

SUS304 body code W; 20 mm nominal/orifice; standard closure. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 3/4, Pneumatic actuator Q40 — no electrical coil, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2L15015B 2/2-Way Internally Piloted Normally Closed Valve

Model-specific summary: Higher-flow normally closed pilot valve requiring minimum differential pressure.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2L15015B is an AirTAC 2/2-way internally piloted normally closed valve using PT 1/2 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

15 mm orifice; higher-flow pilot valve. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/2, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2L03008E 2/2-Way Internally Piloted Normally Closed Valve

Model-specific summary: Normally closed pilot valve for air, water or compatible oil.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2L03008E is an AirTAC 2/2-way internally piloted normally closed valve using PT 1/4 and ac 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

03 body family; terminal entry. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, AC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2L03006BT 2/2-Way Internally Piloted Normally Closed Valve

Model-specific summary: Normally closed internally piloted valve for NPT systems.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2L03006BT is an AirTAC 2/2-way internally piloted normally closed valve using NPT 1/8 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

03 body family; NPT. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2KW05015F 2/2-Way Internally Piloted Normally Open Valve

Model-specific summary: Normally open brass pilot valve with DC 12 V coil.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2KW05015F is an AirTAC 2/2-way internally piloted normally open valve using PT 1/2 and dc 12 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

05 body family; normally open. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/2, DC 12 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2KWH03006E High-Pressure Normally Open Solenoid Valve

Model-specific summary: High-pressure-code normally open valve; confirm exact working-pressure table.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2KWH03006E is an AirTAC high-pressure normally open solenoid valve using PT 1/8 and ac 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

H high-pressure option; normally open. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, AC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2KW03008B 2/2-Way Internally Piloted Normally Open Valve

Model-specific summary: Normally open pilot valve that closes when energized; suited to fail-open fluid circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2KW03008B is an AirTAC 2/2-way internally piloted normally open valve using PT 1/4 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

Normally open; brass body. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2L03008BT 2/2-Way Internally Piloted Normally Closed Valve

Model-specific summary: Normally closed internally piloted valve; verify minimum operating differential.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2L03008BT is an AirTAC 2/2-way internally piloted normally closed valve using NPT 1/4 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

03 body/orifice family; NPT. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2W03006CT 2/2-Way Normally Closed Fluid Solenoid Valve

Model-specific summary: Direct-acting brass fluid valve for NPT systems.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2W03006CT is an AirTAC 2/2-way normally closed fluid solenoid valve using NPT 1/8 and ac 110 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

03 direct-acting body; NPT thread. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, AC 110 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2ST03008E 2/2-Way Stainless Steel Fluid Solenoid Valve

Model-specific summary: Stainless-steel normally closed valve with high-flow option; verify media and seal limits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2ST03008E is an AirTAC 2/2-way stainless steel fluid solenoid valve using PT 1/4 and ac 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

T high-flow option; 03 body/orifice family. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, AC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2W15015BG 2/2-Way Pilot-Operated Fluid Solenoid Valve

Model-specific summary: Higher-flow internally piloted brass valve; minimum pressure differential is required.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2W15015BG is an AirTAC 2/2-way pilot-operated fluid solenoid valve using G 1/2 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

15 mm orifice; normally closed; G thread. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/2, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2W05010A 2/2-Way Normally Closed Fluid Solenoid Valve

Model-specific summary: Normally closed brass fluid valve for compatible air, water and oil service.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2W05010A is an AirTAC 2/2-way normally closed fluid solenoid valve using PT 3/8 and ac 220 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

05 body/orifice family; terminal connection. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 3/8, AC 220 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2WL03008A 2/2-Way Low-Pressure Fluid Solenoid Valve

Model-specific summary: Low-pressure brass fluid valve; verify differential-pressure range before sizing.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2WL03008A is an AirTAC 2/2-way low-pressure fluid solenoid valve using PT 1/4 and ac 220 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

L low-pressure configuration; normally closed. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, AC 220 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2W03008BIG 2/2-Way Normally Closed Fluid Solenoid Valve

Model-specific summary: Brass-body shutoff valve for air, water or compatible oil; confirm seal/media compatibility.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

2W03008BIG is an AirTAC 2/2-way normally closed fluid solenoid valve using G 1/4 and dc 24 v.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

03 direct-acting body; I lead wire; G thread. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/4, DC 24 V, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 2W03008A 2/2-Way Fluid Solenoid Valve

Model-specific summary: AirTAC 2W03008A is a 2/2-way fluid solenoid valve configured as normally closed brass valve; 03 body/orifice code.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

2W03008A uses PT 1/4 and ac 220 v.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/4, AC 220 V, Normally closed brass valve; 03 body/orifice code, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 2V25025B 2/2-Way Solenoid Valve

Model-specific summary: AirTAC 2V25025B is a 2/2-way solenoid valve configured as normally closed; 25 mm nominal/orifice code.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

2V25025B uses PT 1 inch and dc 24 v.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1 inch, DC 24 V, Normally closed; 25 mm nominal/orifice code, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 2V13015A 2/2-Way Solenoid Valve

Model-specific summary: AirTAC 2V13015A is a 2/2-way solenoid valve configured as normally closed; 13 mm nominal/orifice code.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

2V13015A uses PT 1/2 and ac 220 v.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT 1/2, AC 220 V, Normally closed; 13 mm nominal/orifice code, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 2V13010BT 2/2-Way Direct-Acting Solenoid Valve

Model-specific summary: AirTAC 2V13010BT is a 2/2-way direct-acting solenoid valve configured as normally closed; 13 mm nominal/orifice code; npt.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

2V13010BT uses NPT 3/8 and dc 24 v.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify NPT 3/8, DC 24 V, Normally closed; 13 mm nominal/orifice code; NPT, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 2V02508BG 2/2-Way Direct-Acting Solenoid Valve

Model-specific summary: AirTAC 2V02508BG is a 2/2-way direct-acting solenoid valve configured as normally closed; 2.5 mm orifice; g thread.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

2V02508BG uses G 1/4 and dc 24 v.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G 1/4, DC 24 V, Normally closed; 2.5 mm orifice; G thread, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 4V210-005-P2 5/2-Way Solenoid Valve

Model-specific summary: AirTAC 4V210-005-P2 is a 5/2-way solenoid valve configured as single-solenoid spring-return; special 005-p2 configuration.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

4V210-005-P2 uses Series valve ports — verify P2 option and electrical coil — 005/p2 code needs nameplate confirmation.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify Series valve ports — verify P2 option, Electrical coil — 005/P2 code needs nameplate confirmation, Single-solenoid spring-return; special 005-P2 configuration, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 200M4FT Solenoid Valve Manifold Base

Model-specific summary: AirTAC 200M4FT is a solenoid valve manifold base configured as 200m; 4-station/base configuration.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

200M4FT uses NPT manifold ports (T suffix) and not applicable unless valves included.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify NPT manifold ports (T suffix), Not applicable unless valves included, 200M; 4-station/base configuration, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC P-200M-R2 Solenoid Valve Manifold Blind Plate

Model-specific summary: AirTAC P-200M-R2 is a solenoid valve manifold blind plate configured as r2 blind plate accessory.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

P-200M-R2 uses 200M manifold interface and not applicable.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify 200M manifold interface, Not applicable, R2 blind plate accessory, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC P-200M-R1 Solenoid Valve Manifold Accessory

Model-specific summary: AirTAC P-200M-R1 is a solenoid valve manifold accessory configured as r1 end/accessory plate.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

P-200M-R1 uses 200M manifold interface and not applicable.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify 200M manifold interface, Not applicable, R1 end/accessory plate, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC P-100M-R2 Solenoid Valve Manifold Blind Plate

Model-specific summary: AirTAC P-100M-R2 is a solenoid valve manifold blind plate configured as r2 blind plate accessory.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

P-100M-R2 uses 100M manifold interface and not applicable.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify 100M manifold interface, Not applicable, R2 blind plate accessory, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC P-400M-R1 Solenoid Valve Manifold Accessory

Model-specific summary: AirTAC P-400M-R1 is a solenoid valve manifold accessory configured as r1 end/accessory plate.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

P-400M-R1 uses 400M manifold interface and not applicable.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify 400M manifold interface, Not applicable, R1 end/accessory plate, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC P-3V200M-R2 Solenoid Valve Manifold Blind Plate

Model-specific summary: AirTAC P-3V200M-R2 is a solenoid valve manifold blind plate configured as r2 blind plate accessory.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

P-3V200M-R2 uses 3V200M manifold interface and not applicable.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify 3V200M manifold interface, Not applicable, R2 blind plate accessory, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 3V200M6F Solenoid Valve Manifold Base

Model-specific summary: AirTAC 3V200M6F is a solenoid valve manifold base configured as 3v200m; 6-station base.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

3V200M6F uses PT manifold ports and not applicable unless valves included.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify PT manifold ports, Not applicable unless valves included, 3V200M; 6-station base, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.

AirTAC 200M4FG Solenoid Valve Manifold Base

Model-specific summary: AirTAC 200M4FG is a solenoid valve manifold base configured as 200m; 4-station/base configuration; g thread.

Key attributes

Product features

• Complete customer-supplied model code retained for procurement and cross-reference.
• Selection-critical connection, voltage and function appear before general specifications.
• Family and option structure checked against the AirTAC 2026A structured database.

Installation and selection notes

1. Compare the full model and nameplate before installation.
2. Check pressure, medium, temperature, flow direction and mounting clearance.
3. Flush pneumatic lines and use appropriate filtration.
4. Accessories and manifold plates do not include the mating valve or sensor unless explicitly stated.

Quick selection answer

200M4FG uses G-thread manifold ports and not applicable unless valves included.

Typical applications

Suitable for compressed-air preparation, pneumatic connections, actuator control, pressure monitoring or compatible fluid switching where the complete configuration matches the system.

Frequently asked questions

What should be checked before ordering?

Verify G-thread manifold ports, Not applicable unless valves included, 200M; 4-station/base configuration; G thread, medium compatibility, mounting and included components.

Can similar threads or tube sizes be substituted?

No. PT, G, NPT, metric and inch connections require matching components and sealing methods.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Source: AirTAC Master Product Database 2026A. Updated 2026-08-22. This independent listing does not claim official or authorized-distributor status.