AirTAC 4L21006 5/2-Way Push-Pull Valve

Model-specific summary: Compact push-pull valve for double-acting actuator control.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4L21006 is an AirTAC 5/2-way push-pull valve using PT 1/8 and manual push-pull — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, Manual push-pull — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HA330E08 5/3-Way Hand Lever Valve

Model-specific summary: Manual three-position valve with exhaust-centre configuration.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HA330E08 is an AirTAC 5/3-way hand lever valve using PT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; exhaust centre; A option. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HA230E06G 5/3-Way Hand Lever Valve

Model-specific summary: Manual 5/3 valve with exhaust-centre function and G ports.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HA230E06G is an AirTAC 5/3-way hand lever valve using G 1/8 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; exhaust centre; A option. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/8, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HA21006T 5/2-Way Hand Lever Valve

Model-specific summary: Compact hand-lever valve retaining the A option.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HA21006T is an AirTAC 5/2-way hand lever valve using NPT 1/8 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; A configuration. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H330E10 5/3-Way Hand Lever Valve

Model-specific summary: Higher-flow manual 5/3 valve with exhaust-centre function.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H330E10 is an AirTAC 5/3-way hand lever valve using PT 3/8 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; exhaust centre. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 3/8, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H330E08 5/3-Way Hand Lever Valve

Model-specific summary: Manual 5/3 valve with exhaust-centre function.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H330E08 is an AirTAC 5/3-way hand lever valve using PT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; exhaust centre. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3FM21006 Mini 3/2-Way Foot Pedal Valve

Model-specific summary: Compact foot-operated pneumatic signal valve.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3FM21006 is an AirTAC mini 3/2-way foot pedal valve using PT 1/8 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

Miniature foot valve. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3F21008LG 3/2-Way Locking Foot Pedal Valve

Model-specific summary: Locking 3/2 foot valve with G-thread connection.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3F21008LG is an AirTAC 3/2-way locking foot pedal valve using G 1/4 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

L locking option. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/4, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3F21008G 3/2-Way Foot Pedal Valve

Model-specific summary: Foot-operated 3/2 pneumatic valve with G ports.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3F21008G is an AirTAC 3/2-way foot pedal valve using G 1/4 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

Standard return. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check G 1/4, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H21008T 5/2-Way Hand Lever Valve

Model-specific summary: Manual 5/2 spool valve for NPT pneumatic circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H21008T is an AirTAC 5/2-way hand lever valve using NPT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HA230C08T 5/3-Way Hand Lever Valve

Model-specific summary: Manual three-position valve with closed-centre function and A configuration.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HA230C08T is an AirTAC 5/3-way hand lever valve using NPT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; closed centre; A option. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4L11006T 5/2-Way Push-Pull Valve

Model-specific summary: Compact push-pull directional valve with NPT ports.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4L11006T is an AirTAC 5/2-way push-pull valve using NPT 1/8 and manual push-pull — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

100 series. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, Manual push-pull — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4L21008 5/2-Way Push-Pull Valve

Model-specific summary: Manual push-pull 5/2 valve for double-acting cylinder control.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4L21008 is an AirTAC 5/2-way push-pull valve using PT 1/4 and manual push-pull — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Manual push-pull — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3L21008T 3/2-Way Push-Pull Valve

Model-specific summary: Manual push-pull 3/2 valve for pneumatic isolation and signal control.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3L21008T is an AirTAC 3/2-way push-pull valve using NPT 1/4 and manual push-pull — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Manual push-pull — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3F21008T 3/2-Way Foot Pedal Valve

Model-specific summary: Foot-operated 3/2 valve for hands-free pneumatic signals.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3F21008T is an AirTAC 3/2-way foot pedal valve using NPT 1/4 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

Standard return foot valve. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H230E08 5/3-Way Hand Lever Valve

Model-specific summary: Three-position hand valve that vents working ports in the centre position.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H230E08 is an AirTAC 5/3-way hand lever valve using PT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; exhaust centre. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4F21008LFT 5/2-Way Locking Foot Pedal Valve

Model-specific summary: Locking foot valve for maintaining the selected pneumatic state until released.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4F21008LFT is an AirTAC 5/2-way locking foot pedal valve using NPT 1/4 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

L locking option; F guard/configuration; NPT. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4F21008FT 5/2-Way Foot Pedal Valve

Model-specific summary: Hands-free pneumatic directional valve for operator stations.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4F21008FT is an AirTAC 5/2-way foot pedal valve using NPT 1/4 and foot operated — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

F guard/configuration option; T NPT. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Foot operated — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H21006 5/2-Way Hand Lever Valve

Model-specific summary: Compact manually operated 5/2 spool valve.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H21006 is an AirTAC 5/2-way hand lever valve using PT 1/8 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; hand lever operation. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HA31008T 5/2-Way Hand Lever Valve

Model-specific summary: Manual directional valve; retain A option and verify handle/return configuration.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HA31008T is an AirTAC 5/2-way hand lever valve using NPT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; A configuration. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H230C06T 5/3-Way Hand Lever Valve

Model-specific summary: Three-position hand valve that blocks working ports in the centre position.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H230C06T is an AirTAC 5/3-way hand lever valve using NPT 1/8 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; closed centre. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4H31008 5/2-Way Hand Lever Valve

Model-specific summary: Manual spool valve with positive lever positioning for cylinder direction control.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4H31008 is an AirTAC 5/2-way hand lever valve using PT 1/4 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; hand lever operation. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4HV43015T 4/3-Way Hand Rotary Valve

Model-specific summary: High-flow hand rotary directional valve; verify centre function from complete code/drawing.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4HV43015T is an AirTAC 4/3-way hand rotary valve using NPT 1/2 and manual — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

400 series; three-position hand rotary. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/2, Manual — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4A22006T 5/2-Way Double-Air-Pilot Valve

Model-specific summary: Double-air-pilot valve with NPT ports for pneumatic logic circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4A22006T is an AirTAC 5/2-way double-air-pilot valve using NPT 1/8 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; double pilot; memory function. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4A12006 5/2-Way Double-Air-Pilot Valve

Model-specific summary: Compact bistable 5/2 valve for cylinder direction control without electricity.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4A12006 is an AirTAC 5/2-way double-air-pilot valve using PT 1/8 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

100 series; double pilot; memory function. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3A21008NC 3/2-Way Single-Air-Pilot Valve

Model-specific summary: Normally closed 3/2 air-pilot valve with PT 1/4 ports.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3A21008NC is an AirTAC 3/2-way single-air-pilot valve using PT 1/4 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; normally closed. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/4, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3A21006NC 3/2-Way Single-Air-Pilot Valve

Model-specific summary: Air-pilot 3/2 valve for pneumatic logic and actuator pilot circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3A21006NC is an AirTAC 3/2-way single-air-pilot valve using PT 1/8 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 series; normally closed. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check PT 1/8, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 3A11006NCT 3/2-Way Single-Air-Pilot Valve

Model-specific summary: Compact normally closed air-pilot valve for pneumatic signal control.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

3A11006NCT is an AirTAC 3/2-way single-air-pilot valve using NPT 1/8 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

100 series; normally closed; spring return. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/8, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC 4A330E10T 5/3-Way Double-Air-Pilot Valve

Model-specific summary: Bistable pneumatic directional valve with exhaust-centre function.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

4A330E10T is an AirTAC 5/3-way double-air-pilot valve using NPT 3/8 and pneumatic pilot — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

300 series; exhaust-centre; double pilot. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 3/8, Pneumatic pilot — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.

AirTAC ASC20008T Pneumatic Flow Control Valve

Model-specific summary: Inline one-way flow controller for actuator speed adjustment in NPT circuits.

Key attributes

Construction and operating advantages

• Model-specific actuation and normal state are stated explicitly to reduce replacement errors.
• AirTAC spool-type pneumatic valves use low-friction internal processing and generally do not require added lubrication.
• Fluid valves must be selected for medium, viscosity, seal, temperature and differential-pressure requirements.
• Manual valves provide direct operator control without electrical wiring.

Installation and selection notes

1. Verify flow direction, port identification, thread standard and the complete model suffix.
2. Use filtered compressed air for pneumatic-control products and flush all piping before installation.
3. For pilot-operated fluid valves, confirm the minimum operating pressure differential.
4. Protect valves from freezing, vibration, dirt and incompatible fluids.

Quick selection answer

ASC20008T is an AirTAC pneumatic flow control valve using NPT 1/4 and pneumatic — no voltage.

Typical applications

Suitable for industrial automation, pneumatic cylinder control, machine isolation, operator stations or compatible air/water/oil switching according to the stated valve family.

Frequently asked questions

What is the safe-state function?

200 size; adjustable one-way flow control. Confirm the circuit symbol before replacing another valve.

What should be checked before ordering?

Check NPT 1/4, Pneumatic — no voltage, normal state, valve positions, centre function, media compatibility and electrical entry.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Sources: AirTAC Master Product Database 2026A and official AirTAC product documentation only. Updated 2026-08-23. This independent listing does not claim official or authorized-distributor status.