AirTAC MF20X300SUFA Mini Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 300 mm-stroke AirTAC MF Series double-acting cylinder with magnetic piston, u rear-cover configuration and fa front flange.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MF20X300SUFA is a 20 mm-bore, 300 mm-stroke AirTAC MF Series double-acting cylinder with magnetic piston, u rear-cover configuration and fa front flange.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 300 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MD16X20 Multi-Mount Pneumatic Cylinder

Model-specific summary: A 16 mm-bore, 20 mm-stroke AirTAC MD Series double-acting cylinder, standard rear cover and free/multi-mount body.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MD16X20 is a 16 mm-bore, 20 mm-stroke AirTAC MD Series double-acting cylinder, standard rear cover and free/multi-mount body.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 16 mm bore × 20 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MA32X100SCA Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: A 32 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, ca swing-tail rear cover and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MA32X100SCA is a 32 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, ca swing-tail rear cover and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 32 mm bore × 100 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MA20X100SCA Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, ca swing-tail rear cover and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MA20X100SCA is a 20 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, ca swing-tail rear cover and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 100 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MF20X40CA Mini Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 40 mm-stroke AirTAC MF Series double-acting cylinder, ca swing-tail rear cover and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MF20X40CA is a 20 mm-bore, 40 mm-stroke AirTAC MF Series double-acting cylinder, ca swing-tail rear cover and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 40 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MI10X60CA Mini Pneumatic Cylinder

Model-specific summary: A 10 mm-bore, 60 mm-stroke AirTAC MI Series double-acting cylinder, ca swing-tail rear cover and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MI10X60CA is a 10 mm-bore, 60 mm-stroke AirTAC MI Series double-acting cylinder, ca swing-tail rear cover and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 10 mm bore × 60 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MA25X25SU Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: A 25 mm-bore, 25 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, u rear-cover configuration and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MA25X25SU is a 25 mm-bore, 25 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, u rear-cover configuration and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 25 mm bore × 25 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MA20X100SU Stainless Steel Mini Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, u rear-cover configuration and basic mounting.

Key attributes

Product features

• Complete model code retained for replacement and engineering cross-reference.
• Selection-critical connection, power and configuration are displayed before general specifications.
• Designed for industrial automation within the manufacturer limits.

Installation and selection

1. Compare the complete nameplate code with this listing.
2. Confirm pressure, temperature, medium, mounting space and mating interface.
3. Flush air lines and use filtration appropriate to the product.
4. Confirm the complete suffix and manufacturer drawing before ordering.

Quick selection answer

MA20X100SU is a 20 mm-bore, 100 mm-stroke AirTAC MA Series double-acting cylinder with magnetic piston, u rear-cover configuration and basic mounting.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Check the complete suffix, Series air port — verify drawing, Pneumatic — no voltage, 20 mm bore × 100 mm stroke, installation dimensions and compatible accessories.

Can a similar-looking suffix be substituted?

No. Suffixes may change thread, drain, filter grade, pressure range, sensor wiring, mounting or electrical characteristics.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-22. AirTAC is the manufacturer and trademark owner; this independent listing does not claim official or authorized-distributor status.

AirTAC MBL32X100CA Mini Pneumatic Cylinder

Model-specific summary: A 32 mm-bore, 100 mm-stroke MBL Series double-acting pneumatic cylinder.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

MBL32X100CA is a 32 mm-bore, 100 mm-stroke MBL Series double-acting pneumatic cylinder.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC SC32X200S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: A 32 mm-bore, 200 mm-stroke SC Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

SC32X200S is a 32 mm-bore, 200 mm-stroke SC Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, PT 1/8, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC SC40X150S Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: A 40 mm-bore, 150 mm-stroke SC Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

SC40X150S is a 40 mm-bore, 150 mm-stroke SC Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, PT 1/4, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC SC40X75 Standard Tie-Rod Pneumatic Cylinder

Model-specific summary: A 40 mm-bore, 75 mm-stroke SC Series double-acting pneumatic cylinder.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

SC40X75 is a 40 mm-bore, 75 mm-stroke SC Series double-acting pneumatic cylinder.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, PT 1/4, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN20X50S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 50 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN20X50S is a 20 mm-bore, 50 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN20X30S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 30 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN20X30S is a 20 mm-bore, 30 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TR25X40S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 25 mm-bore, 40 mm-stroke TR Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TR25X40S is a 25 mm-bore, 40 mm-stroke TR Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN16X80S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 16 mm-bore, 80 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN16X80S is a 16 mm-bore, 80 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN16X20S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 16 mm-bore, 20 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN16X20S is a 16 mm-bore, 20 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN20X40S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 40 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN20X40S is a 20 mm-bore, 40 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN10X60S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 10 mm-bore, 60 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN10X60S is a 10 mm-bore, 60 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, M5×0.8 series port, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TN10X10S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 10 mm-bore, 10 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TN10X10S is a 10 mm-bore, 10 mm-stroke TN Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, M5×0.8 series port, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC TR20X75S Twin-Rod Pneumatic Cylinder

Model-specific summary: A 20 mm-bore, 75 mm-stroke TR Series double-acting pneumatic cylinder with magnetic piston.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

TR20X75S is a 20 mm-bore, 75 mm-stroke TR Series double-acting pneumatic cylinder with magnetic piston.

Typical applications

Clamping, positioning, feeding, ejecting and general industrial automation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series port — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC HRQ7 Pneumatic Rotary Table

Model-specific summary: A compact HRQ size-7 pneumatic rotary table for controlled angular positioning.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. HRQ7 does not by itself state every rotation-angle/adjuster option; confirm the complete configuration and drawing before order.

Quick selection answer

HRQ7 is a compact HRQ size-7 pneumatic rotary table for controlled angular positioning.

Typical applications

Indexing, workpiece turning, inspection and compact pick-and-place mechanisms.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, Series air ports — verify drawing, Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC PCV08 Pilot-Operated Check Valve

Model-specific summary: A PT 1/4 pilot-operated check valve used to block reverse flow until pilot pressure releases it.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Ordering code reviewed against the series rules; confirm the nameplate and dimensional drawing before purchase.

Quick selection answer

PCV08 is a PT 1/4 pilot-operated check valve used to block reverse flow until pilot pressure releases it.

Typical applications

Cylinder holding, drop prevention and pneumatic circuit isolation.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, PT 1/4 (08), Not applicable, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC CMSG-030 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC CMSG Series cylinder sensor in 3.0 m lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

CMSG-030 is an AirTAC CMSG Series cylinder sensor in 3.0 m lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC CMSH-020 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC CMSH Series cylinder sensor in 2.0 m lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

CMSH-020 is an AirTAC CMSH Series cylinder sensor in 2.0 m lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC DMSE-PM08 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC DMSE Series cylinder sensor in pm08 connector/lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

DMSE-PM08 is an AirTAC DMSE Series cylinder sensor in pm08 connector/lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC CMSG-C08 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC CMSG Series cylinder sensor in c08 connector/lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

CMSG-C08 is an AirTAC CMSG Series cylinder sensor in c08 connector/lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC DS1JP020 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC DS1J Series cylinder sensor in 2.0 m lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

DS1JP020 is an AirTAC DS1J Series cylinder sensor in 2.0 m lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC CMSE-030 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC CMSE Series cylinder sensor in 3.0 m lead option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

CMSE-030 is an AirTAC CMSE Series cylinder sensor in 3.0 m lead option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.

AirTAC DMSE-PC12 Magnetic Cylinder Sensor

Model-specific summary: An AirTAC DMSE Series cylinder sensor in pc12 cable/connector option configuration.

Key attributes

Product features

• Complete ordering code retained for accurate replacement and cross-reference work.
• Designed for industrial pneumatic automation within the manufacturer ratings.
• Selection-critical connection, voltage and function are shown above before general specifications.

Installation and commissioning

1. Compare the complete model code and nameplate before installation.
2. Confirm flow direction, port standard, supply conditions and mounting clearance.
3. Use properly filtered air and remove pipe debris before connection.
4. Confirm cylinder compatibility, sensing type, cable/connector code and PLC input voltage before purchase.

Quick selection answer

DMSE-PC12 is an AirTAC DMSE Series cylinder sensor in pc12 cable/connector option configuration.

Typical applications

Pneumatic cylinder position feedback, end-of-stroke sensing and automation control.

Frequently asked questions

What should be checked before ordering?

Verify the entire suffix, No pneumatic thread, Electrical sensor — confirm catalog voltage, function, mounting and operating limits. A similar-looking model may have a different centre function, voltage or thread.

Are PT, G and NPT interchangeable?

No. Their thread profiles and sealing methods differ. Select the exact regional thread code.

PDF datasheet

Download the corresponding AirTAC PDF datasheet

Reviewed against AirTAC catalog ordering rules. Updated 2026-08-21. AirTAC is the manufacturer and trademark owner; this independent product listing does not claim official or authorized-distributor status.